Updates
Download the update zip file, unzip, and follow the details on how to update your Urano, in the Urano user manual.
If you have not updated your Urano for some time, it is only nescessary to update it with the latest update.
PLEASE REMEMBER TO USE A FAT32 FORMATTED USB DRIVE, NOT LARGER THAN 32 GB, AND PLEASE DO NOT RENAME THE FILES!
IMPORTANT:
I RECOMMEND USING A NEWER 16 OR 32 GB FAT32 FORMATTED USB STICK, THAT ARE A BRAND LIKE KINGSTON OR SANDISK, FOR THE UPDATING. TRY TO IMPORT A SAMPLING FROM THIS DRIVE, BEFORE YOU PERFORM THE UPDATE, TO MAKE SURE THAT EVERYTHING WORKS AS INTENDED.
UPDATES HAS BEEN TESTED, USING A WINDOWS 10 PC. OTHER OPERATING SYSTEMS ARE NOT SUPPORTED.
PLEASE FIND A LIST OF TESTED USB STICKS
Update 8.77
-Sample Xfade added
Bug fixes:
-Recording the CV inputs to Controller tracks did not work. Now it does.
By downloading this update, I hereby declare, that I understand, that if I do not use the recommended 16GB or 32 GB USBstick, from the list of tested USB sticks (please see in top of this site), for updating my instrument, and if I have not tested this by importing a sampling first, my instrument might be malfunctioning afterwards. So please follow the recommendations on the top of this site.
Update 8.73
Bug fixes:
-OSC Type 1: The sine wave was one octave higher than the rest of the waveforms. This has now been corrected.
-When a Draw wave LFO were in one-time mode, and Smooth were turned on, it would end at the first value, instead of the last. This has now been fixed.
By downloading this update, I hereby declare, that I understand, that if I do not use the recommended 16GB or 32 GB USBstick, from the list of tested USB sticks (please see in top of this site), for updating my instrument, and if I have not tested this by importing a sampling first, my instrument might be malfunctioning afterwards. So please follow the recommendations on the top of this site.
Update 8.71
-VCF14 Transistor Ladder VCF added to filter board profiles.
Bug fixes:
-MIDI sync could sometimes get unstable. This has now been corrected.
-The modulation VU-meter on the VCF Out2 parameter was missing. Now it’s there!
Update 8.67
-New FOF oscillator type!
-Filter Boards VCF11 (Zaturn), VCF12 (FilterBank) and VCF13 (Diode Drive) profiles have been added.
-2 extra modulation sources have been added to the CV outputs.
Update 8.58
Unfortunately the latest updates introduced a couple of new bug on effects selection and on Oscillator types parameter names. These have now been fixed, and a couple of new things have been added:
-A smoothing function has been added to the LFO Draw waves.
-Panic and MIDI All Notes Off now also stops all sample playback.
Update 8.53
-It is now possible to select a user filter as a duo filter. This is necessary in order to use the new VCF11 Zaturn filter board as 2 separate filters.
Update 8.51
-New Draw waveforms, which can be used by the LFO’s and the Oscillators. With copy/paste functions!
-New Harmonic Oscillator.
-New Sine Function oscillator (SinF -derived from microGothar)
-Linear FM and Phase Modulation have been added to the oscillators.
-New Reso EQ Effect!
-New Smooth dual tap Mod Delay effect!
-New Comb Filter!
-New optimized Compressor with side chain!
-Chorus effect has been optimized.
-Immediate Preset change!
-Sequencer continue/restart function.
-Metronome is now only audible, when the sequencer is running.
-Sequencer metronome count-in is now only active, when the metronome is on.
-Sequencer real time recording timing has been improved.
-Preset/Song bank select buttons have been added.
-Sample select +/- 128 buttons added.
-Parameters fine adjust.
-New “Draw” button on the draw pages, which deactivates all other touch buttons, and lets you draw in peace.
Update 8.00
-4 note “polyphonic” mode
-LFO’s trigger outputs
-3 Octaves touch keyboard with pitch bend function
-Sequencer controller tracks smooth on/off per step
-Sequencer note tracks on/off steps on the touch screen
-Decay Envelope output VU-meter
Update 7.74
-Random Generators input source can now be selected.
-LFO’s can now Key Sync to sequencer tracks.
-All sequencer note track steps can now easily be set to the trigger note.
-Can now import LD3, Tiny LD and SpazeDrum sequences.
Bug Fixes:
-When switching a sequencer note step off and then on again, the value of the trigger note would be written to the step, and the original value would be overwritten. This has now been fixed.
Update 7.66
-Sample Pitch 2 effect added to EFX 7 and 8.
-Decay envelopes will now loop in sync with the ADSR envelope.
-New Logic functions have been added to the Ring VCA’s.
-“Bar” number can now be viewed and set on the Note and Controller track pages.
-The “INP” (Inputs) touch buttons have been moved, so that they are on the same location on all modules, that has inputs.
Bug Fixes:
-The analog filters VCF3 and VCF4 will now show as audio/modulation sources, without having to touch the parameter.
-The Decay Envelope would sometimes not output anything. This has now been fixed.
-Modulating the LFO’s curve parameter could make Urano crash. This has now been fixed.
-The playback indicator on the sequencer tracks would sometimes become double in length. This has now been fixed.
-The controller track numbers on the note tracks note randomizer probability parameter setting zero were wrong. This has now been fixed.
-When a controller track controlled a note track note randomizer probability, a value of zero, could still make the note track play back. This has now been fixed.
-When Note tracks Temp Random Triggers were set to 0%, all note triggers would not always be cleared. This has now been fixed.
-In an oscillator, when changing samplings via the SMP +/- buttons, would make sample waveforms display on top of each other. This has now been fixed.
-Sequencer Temp functions did not work properly on Morph Layer B. This has now been fixed.
-On some effects, the names of the modulation parameters were wrong. This has now been fixed.
-USB export of User Filter parameters were missing. Now it is back!
